Holes are drilled so let’s get them cleaned up and ready for fasteners. Paul Dye explains the process of deburring holes and edges in this episode.
This series is sponsored by Aircraft Spruce & Specialty.
In Case You Missed It
Letters
A&Ps and ExperimentalsI would like to commend Dave Prizio on his very informative article...
500-hour Inspection vs. Overhaul
About every 500 hours, your magnetos need to be inspected and repaired as needed...
you can save a lot of time and effort by deburring with this tool. Especially when you have a thousand or more holes to debur.
One pass gets both sides.
https://cogsdill.com/products/deburring-tools/