Home Search

build a bear - search results

If you're not happy with the results, please do another search

All Over the Map

3
...certifying your Experimental aircraft. It contains detailed instructions, forms, placards and checklists. If this is your first build and you’re not using it, you’ll spend more time getting all the...

Homespun Router Table

0
...of the airplane market. The first airplane I bought plans for was the Evans VP-1. The first airplane I started building was a Pietenpol Air Camper. Aeronca Champs were an...

Where’s the Best Place To Build?

3
...area for the many days of building that lie ahead. If you are a first-time builder or are considering an aircraft kit purchase, one of the very first questions you...

Sparker

0

Building a Composite Fuel Tank

0
...lower risk of unporting due to its geometry. The downside of the header tank is of course extra weight, which is a constant concern in this project, so the build...

We Have a Fixture!

0
...tool on a workpiece like a jig.” By that definition, I finished building a fixture today – one that will be used to build the tail of the F1 Rocket...

Pursuing Perfection

0
...would build the absolute best kit that met his desires, and he would build it to be “the best that I could possibly make it.” EAA Chapter 690 in Lawrenceville,...

Las Cruces Confidential

0
...DNF’d once…). Pylons To have a pylon race you need pylons, but what a pylon should look like and how to build them is a surprisingly open question. At Reno...

Las Cruces A Win

0
...Sport Class is ready to build on this well-run first race. Both the State of New Mexico and City of Las Cruces played out-sized roles in making the Las Cruces...

Kitfox Speedster 916

2
...the Super Sport, though many SS builders are opting for the cabane-style gear (looks a bit like a Cub’s) that’s standard on the STi. Hanging from that sleek aluminum gear...

In Case You Missed It

STOL Mods: How Short Can You Go?

0
Valdez pilots are true experimenters.

Rapid Prototyping and Experimental Design

0
Learning from the pros.

Aero ‘lectrics

0
Jim Weir lays the groundwork for a DIY LED rotating beacon project.

Leaky Primer Line

0
Primer lines need to be silver soldered into their fittings. Using RTV to fix...