KITPLANES Senior Editor Bob Fritz celebrated the first flight of his Jabiru J250 last week. Regular readers will be familiar with Bobs project from the bolt-by-bolt reports in the magazine. Having received tremendous local support to trailer the Jabiru from his home airport of Swansboro to Lincoln, California, Bob enlisted the services of Jabiru Pacific jack-of-all-trades Jim McCormick to do the first flight. According to Bob, We rolled 99T out, Jim did his preflight, fired up and taxied away. Handheld radios were switched on, and Jim announced he was taking the runway for a first flight. “Hes rolling!” was heard but almost before that faded away 99T was off the ground and climbing smoothly. Jim made a couple of laps around the pattern and ascended to 3500 feet AGL, where he learned the feel. Most of the flight was in the sun and really nothing to watch: just a small white airplane making gentle turns in bright blue sky. As we became accustomed to that scene, Jim announced his entry into the landing pattern and, with zero other traffic, he was on a short final before we fully adjusted to the idea of 99T actually flying. A smooth touchdown was followed by taxiing to the hangar and engine off. No drama and no surprises, just the transformation of a two-year project into a real aircraft.For me it was surprisingly ho-hum,” Bob said. “It was not until the following week when I started to review the flight via the photos shot by my wife, Li, photos everyone sent to me, and the expertly put together and humorous video created by Rob and Mark Kirkpatrick that I began to appreciate what I saw.Because Bobs Jabiru is certified as an ELSA, he has a 5-hour fly-off period instead of the normal 40. Look for a full report on the first flight and flight testing in an upcoming issue of KITPLANES.
In Case You Missed It
Ask the DAR
Mel Asberry - 0
Are computer software programs sufficient documentation of a build, and what do you do when a DARs request seems unreasonable?
Aero ‘lectrics
Author Jim Weir explains his preparation for the installation of an energy-efficient power system for a hangar or building shed-all on a shoestring budget. He explains how to choose equipment, calculate power needs, the right light fixtures, power generation, equipment suppliers and prices, and the basic legality of such systems;